Work Principle of GRM Series Roller Vertical Mill

600 slag cement grinding station.jpgThe working principle of GRM vertical roller mill independently developed by Great Wall Machinery!

The materials drop to the center of millstone through the lay-off tube, and the millstone, which is rotating at constant speed, scatters evenly the material to the outside by means of centrifugal force, making it form material bed with certain thickness. Meanwhile, the material is rolled and smashed by multiple rollers. The material gradually move to the fringe of the millstone under the continuous force of centrifugal force, when the leaving material meets the hot gas entering into the mill through vane and moves upward, entering the separator through the central casing of mill, the material and hot gas achieve sufficient heat exchange and moisture is evaporated quickly in the process. Powder concentrator controls the granularity of finished product at the exit of roller mill, granules that are larger than regulated size are separated and fall to the millstone, while those materials satisfying the fineness requirement enter the finished product storehouse through powder concentrator.

600 slag cement grinding station.jpg

1. Reduce investment costs, intelligent control

GRMS vertical roller mill  integrates the functions of crushing, grinding, drying, separating and conveying, with compact structure, covering an area of approximately 50% of that of ball mill system. And it can be laid outdoors, so that investment cost is greatly reduced; it is equipped with PLC/DCS automatic control system, can realize remote control and simple operation.

2. Adjust fineness according to demands

A new efficient cage-shaped rotor separator ensures the finished surface area can be adjusted flexibly in the range of 400~550 ㎡/kg, to meet customer different requirements on fineness.

3. Power consumption per set of GRMS is not more than 30Kwh

The horizontal grinding table and conical grinding roller are adopted to ensure the material to form a stable material bed. The energy consumption is low, saving 30% - 40% compared with the ball milling system;

4. Remarkable energy-saving and environmental protection, convenient maintenance

The system is in the state of negative pressure, no dust overflow. Environment is clean, meeting the environmental protection requirements; through the maintenance of the oil cylinder, turning the rocker arm to replace the roller sleeve and lining plate is convenient and fast, so as to reduce downtime losses.

5. Original spare parts to reduce maintenance worries

Grinding rollers, rocker arms and other spare parts in the whole system are manufactured by CHAENG originally, ensuring the quality and greatly reducing the customer's worries of no where to find the spare parts.

 

6. Metal recovery rate of per-ton slag is great

 

Special design of the iron removal device can make pig iron recovery rate reach 0.2-0.3%, so that the per-ton production of slag can get higher metal income, and to avoid the metal "enrichment" phenomenon, reduce the consumption of wearing parts and decrease maintenance costs.