As a Chinese leading cement equipment manufacturer,Chaeng has a history of more than 50 years and has accumulated rich experience in cement machinery. At present, we have been able to supply 300-5000 t/d cement EP project, providing solutions for the world's growing demand for cement. 2500 t/d cement production line designed by Chaeng fully learns from the lessons and experiences of more than 20 years of NSP production line design, the general layout scheme, process layout, equipment selection, automatic control level, etc. and combines with today's international advanced production concept to optimize design.
|Application||Cement Plant, Thermal Power Plant|
|Annual Output||750,000 tons|
|Process Type||New Dry Process|
|Blaine Fineness||3300-3800 cm²/g|
1. Advanced Technology Brings Lower Power Consumption.
Compared with traditional cement production line, the 2500 t/d cement plant designed by Chaeng uses lower energy consumption equipment in the main part of energy consumption, such as vertical raw mill, vertical coal mill, vertical cement mill, etc., and the energy saving effect is very significant, which can reduce energy consumption with an average of 15-20 kWh/t.
2. Reasonable Design, Reduces Dust and Noise Effectively
Cement production has always been one of the leading causes of environmental pollution, thus more and more cement plant is looking for a solution to reduce noise and dust pollution. Chaeng fully considers the sustainable development in the design, reducing dust through campus greening, filter, etc. Since the introduction of noise control programs in key areas, the factory noise is lower than the national standard.
3. Shorter Delivery Time, Earlier Profits
With large supporting cast steel companies and large machining workshop, Chaeng has 120t casting ability and can supply complete spare parts. Furthermore, with a variety of long-term cooperation and first-class equipment suppliers, it greatly shortens delivery cycle, and makes your profit in the shortest possible time.
|Raw Meal Preparation||Limestone Hammer Crusher||LPC-10/600||Feed size: ≤1500mm
Final fineness: ≤75mm
Output: 550 t/h
|Raw Meal Vertical Roller Mill||GRMR36.41||Output:≥180-200 t/h
|Clinker Calcining||Preheater and Precalciner||RF5/2500||Decomposition rate: >90%|
|Rotary Kiln||Φ4×60m||Rotate speed: 0.396-3.96 r/min
Power: 315 kW
Output: 2500 t/d
|Coal Vertical Roller Mill||GRMC20.31||Capacity: 20t/h
|Grate Cooler||LBT32216||52.8 m²|
|Cement Grinding||Cement Ball Mill||Φ4.2×13m||Capacity: ≥140t/h
|O-Sepa Seperator||TES-270||Output: 125 t/h|
|Gypsum Crusher||PEV430×650||Output: 30 t/h|
|Packing||Rotating Packing Machine ×2||BHLW-8||Output: 90 t/h|